Epson Scanner the Selected Device Is Read Only Select Another Device

Using and configuring the Scanner Event Buttons (Copy/Email/PDF/Scan to PC) (Windows and macOS)

• Windows 7, Windows 8, Windows 10
• macOS / Mac OS X
• Scanner Effect Buttons
• Epson Scanner range
• Epson All-In-Ane products

The buttons on a scanner are usually referred to every bit 'dumb button' as when pressed all they exercise is generate a prepare signal, which the computer then responds to. These are generally termed Device Events, an 'event' that is initiated by a device but controlled by the computer.

The buttons on the scanner let you automatically open up scanning software and scan your image to a plan or file. The analogy below shows a scanner with four issue buttons, however the number of buttons volition vary depending on your scanner model. Some Epson All-In-1 products have a 'button' feature simply have just one push. This role is supported when the Epson device is connected to a estimator via a cable connexion such as USB or FireWire.

Example of the Perfection V500 scanner buttons:

Annotation:

Additional options may exist available, depending on the software you have installed on your system. Windows 7 users: Where available, nosotros recommend downloading and installing the latest version of Epson Event Manager from the Epson support website. Windows 7 does non come with preinstalled email software such every bit Outlook Express. You will need to install e-mail software to use the Browse to Email feature of the scanner/All-In-1.

Scanners using EPSON Outcome Manager: Assigning a Projection Program in Epson Effect Director to a Scanner Button

Y'all can assign any of the scanner buttons to open a programme in Epson Event Manager to make scanning your projects even quicker.

Note:
Windows vii users: We recommend downloading and installing the latest version of Epson Result Manager from the Epson support website. Notation: This is non required for the Stylus Photo PX710W and PX810FW models or models released after June 1st 2010.

1. Practice one of the following:

   Windows: Select the Kickoff > Programs or All Programs > Epson Software > Effect Manager.

   Mac OS Ten: Select Applications > Epson Software, and double-click the Launch Result Managing director icon.

2. You see the Button Settings tab in Epson Issue Managing director. Click the arrow in the list next to the push button name, then select the action y'all want to assign. For some models, you lot will demand to select your scanner model commencement from the top-correct corner.
3. Click Close to close the Epson Upshot Director window. Now whenever you press the button y'all assigned, the action you selected opens.

   Windows users: When yous wish to utilize the button-scan characteristic with Effect Manager, make sure that the EPSON Event Director icon is displayed in the notification area of the Windows taskbar/system tray.

   

   • For further assistance, we recommend viewing the post-obit Related Commodity: How exercise I configure the scanner button for Epson Outcome Manager?
   • If you need help using Epson Event Director, do 1 of the following:
     • For Windows: Click the icon in the upper correct corner of the screen.
     • For Mac OS X: Click Help, so Epson Event Managing director Aid.

   Annotation:

   If you are using one of the post-obit network-capable All-In-Ones on a wired (Ethernet) or wireless network, you will demand to make sure that the check box beside Enable Network Scan is ticked in the Network Scan Settings dialogue. This is located at the bottom of the Push button Settings tab. Applicable models include: Stylus Office BX305FW, BX310FN, BX320FW, BX525WD, BX535WD, BX610FW, BX625FWD, BX630FW, BX635FWD, BX925FWD, BX935FWD Stylus SX420W, SX425W, SX510W, SX515W, SX525WD, SX610FW, SX620FW Stylus Photo PX710W, PX720WD, PX730WD, PX810FW, PX820FWD, PX830FWD You can also change the Network Scan Name if needed. We recommend setting a unique, recognisable name on each estimator that will use the All-In-One e.thou. 'MaryPC1', 'Computer1', 'Computer2'. Click OK and close the Button Settings window.

Scanners using EPSON Inventiveness Suite: Assigning a Projection Plan in the Epson Creativity Suite to a Scanner Button

You lot can assign any of the scanner buttons to open up 1 of the Epson Inventiveness Suite project programs to brand scanning your projects even quicker.

1. Do one of the following:

   Windows: Double-click the EPSON File Manager icon on your desktop. You see a window like to the one below.

   Mac Os 10: Double-click the EPSON File Manager for X icon on your desktop. You lot see a window similar to the one below.

   

2. Click the  icon in Load Photos in the upper left corner of the window. You see this window.

   

   • To assign a project program to the Get-go button, become to step 3.
   • To assign a project program to one of the other buttons, go to footstep 4.
3. Select the project program that you want to assign to the Start button and click OK. Run across the table beneath for guidance in selecting the correct project program. Then get to step 5.

   Project programme	Action when the Outset button is pressed
   Browse and Save	Epson Scan starts.
   Scan and Copy	The Copy Utility starts.
   Copy to Fax	The Copy Utility starts.
   Browse to E-post	Epson Scan automatically scans, and so the Send File Via E-mail window appears.
   Scan to PDF	The Scan to PDF window appears.
   View	Epson File Manager starts.

   Note:
   Additional options may be available, depending on the software you have installed on your arrangement. This list includes only project programs that may have been bundled with your product.

4. Click the Advanced Settings button to assign a project program to another button. The following window will open:

   

   Click the arrow in the list next to the push name, and so select the projection program you desire to assign from the drop-down menu that opens. (Run across the table in a higher place for details.) Click OK, then click Cancel to shut the Start Button Settings window.

5. Close Epson File Manager.

   Now whenever you lot press the button yous assigned, the project programme you selected will open.

Assigning Some other Windows Program to a Scanner Button

The way the computer responds to the control when a scanner button is pressed can be programmed on most Windows systems. You lot can plan the scanner to open up an Epson scanning program or a Windows TWAIN-compliant program.

Note:
Note for Macintosh users: On your Macintosh computer, you cannot assign any application other than EPSON Smart Panel or EPSON Creativity Suite (depending on the software your scanner uses) to the buttons on the scanner.

1. Open Printers & Scanners / Scanners & Cameras.
2. Right-click on your scanner's icon and left-click on Backdrop. And then click on the Events tab.

   Normally when a scanner button is pressed the selected program will open up and initiate a scan. If more than one program has been selected on the Events tab then you will exist prompted to select ane of these programs from the dialogue box that appears. Only the programs that will back up device events will exist listed here. If a program is not listed then information technology cannot be associated with a scanner push button.

3. To program a push, follow the instruction for your version of Windows:
   • Windows XP & Vista: In the Select an result listing, choose the button to which you want to assign a plan.

     Note:
     In Windows Vista, it may not be possible to open a specific programme when a scanner button is pressed. Instead y'all may merely receive a prompt which will let you to select a suitable TWAIN-compliant program from a list.

     In the Starting time this program list, choose the program you want to assign. Only compatible programs announced in the list. Click OK.

     

     Notation:
     If you lot want to be given a choice of programs whenever you press the selected push, click the Prompt for which programme to run button instead. If you desire to disable the button from opening a program, click the Take no action button instead.

     Annotation:
     If you want to be given a choice of programs whenever you press the selected button, select more than one plan in the list. If you want to disable the button from opening a plan, click the Disable device events button instead.

     Click Apply, then click OK.

     Notation:
     You must restart your computer earlier using the newly assigned scanner buttons.

Pressing a Scanner Button Does Not Start the Right Plan

• Windows: Make sure your Windows system is set up for scanner events equally follows:
  • Windows XP: Click the Events tab in your scanner'southward Backdrop window and brand sure Have no action is non selected. Too, make sure the desired button is selected in the Select an upshot listing box, and First this program is selected.
• Mac Bone X: Brand sure yous did not install the scanner software in Classic manner or run information technology in Classic mode. Also brand sure you are logged on as the user who installed the scanner software. Other users must commencement starting time EPSON Scanner Monitor in the Applications binder and then press a button to scan.
  • Afterward launching the ImageCapture awarding once, information technology fails to subsequently relaunch and the Browse button on the scanner stops working.
  • Perfection V200 simply: EPSON Scan freezes if launched when the scanner is in standby mode (either from using the Push button Button function or started via an application).
• Smart Panel users: Make sure that the scanner driver (EPSON Scan or EPSON TWAIN) and the EPSON Smart Panel are installed correctly. For Mac Bone X users (Power PC), you may need you to offset in the Classic style to use the Push office.
• EPSON Creativity Suite users: Brand sure EPSON Scan and the EPSON Inventiveness Suite are installed correctly.

Click here for information on the supported email applications for EPSON Creativity Suite.

wannlieve1947.blogspot.com

Source: https://www.epson.eu/viewcon/corporatesite/kb/index/KA-01666

Share this post